June 2006 Archives by date
Starting: Thu Jun 1 02:38:36 CST 2006
Ending: Fri Jun 30 09:31:16 CST 2006
Messages: 198
- git error
Carlos Ojea
- sample app sources
Carlos Ojea
- pci support
Frank
- [PATCH] Make SUBARCH and CROSS_COMPILE for arm
Kevin Hilman
- [PATCH] Introduce io.c for common io and use Kernel coding style
Kevin Hilman
- pci support
Carlos Ojea
- pci support
Jean-Michel Mercier [ateme]
- pci support
Frank
- pci support
Kevin Hilman
- pci support
Pham, Huy
- pci support
Frank
- pci support
Frank
- git tree rebase
Kevin Hilman
- audio driver added
Kevin Hilman
- u-boot soure code and VISA API
stephen
- GPIO, I2C, EDMA
Constantine Shulyupin
- Changing kernel
Constantine Shulyupin
- Changing kernel
George Gu
- u-boot soure code and VISA API
George Gu
- Changing kernel
Truong, Loc
- sample application
Carlos Ojea
- Problem re-cloning the current tree
Carlos Ojea
- Changing kernel
Constantine Shulyupin
- Changing kernel
Ring, Chris
- Problem re-cloning the current tree
Kevin Hilman
- [PATCH] Make SUBARCH and CROSS_COMPILE for arm
Komal Shah
- Changing kernel
George Gu
- about NFS and TFTP uboot
yin yinhai
- Changing kernel
Hunter, Jon
- Changing kernel
Constantine Shulyupin
- about NFS and TFTP uboot
Hunter, Jon
- reboot
Constantine Shulyupin
- ### Davinci
Steve Spano
- EDMA sample
Constantine Shulyupin
- ### Davinci
Vincent CARRIER
- Changing kernel
Truong, Loc
- Changing kernel
Constantine Shulyupin
- VPFE resizer
Carlos Ojea
- VPFE resizer
Roel ten Have
- about : DavinciEVM hard disk driver
stephen
- VPFE resizer
Carlos Ojea
- ### Davinci
Steve Spano
- ### Davinci
Vincent Carrier
- ### Davinci
Steve Spano
- VPFE resizer
Jose Lozano
- VPFE resizer
Pham, Huy
- VPFE resizer
T Ziomek
- compile u-boot error
jp_liu
- compile u-boot error
Carlos Ojea
- compile u-boot error
jp_liu
- compile u-boot error
Subbrathnam, Swaminathan
- about: ramdisk
stephen
- compile u-boot error
jp_liu
- UART Boot
Anthony P. Lannutti
- UART Boot
Martelli, Massimo
- compile u-boot error (jp_liu)
Truong, Loc
- UART Boot
Anthony P. Lannutti
- compile u-boot error (jp_liu)
Griffis, Brad
- USB on Davinci
Frank
- USB on Davinci
Lloyd Sargent
- USB on Davinci
Lloyd Sargent
- Puzzled over bits per pixel...
Lloyd Sargent
- compile u-boot error (jp_liu)
jp_liu
- USB on Davinci
Frank
- compile codec engine examples
jp_liu
- Davinici Linux Sources
jp_liu
- Davinici Linux Sources
Komal Shah
- Davinici Linux Sources
Michael Hallak-Stamler
- about: I2C
stephen
- can i setup Video output to display YUV420 planar data?
Steve Yeh
- Here is write, I'am looking for read
Constantine Shulyupin
- about: I2C
Constantine Shulyupin
- can i setup Video output to display YUV420 planar data?
Hadli, Manjunath
- Puzzled over bits per pixel...
Hadli, Manjunath
- can i setup Video output to display YUV420 planar data?
Steve Yeh
- compile codec engine examples
Preissig, Steve
- DirectFB
Lloyd Sargent
- Puzzled over bits per pixel...
Preissig, Steve
- DirectFB
Carlos Ojea
- I2C from user mode
Constantine Shulyupin
- RESET
Constantine Shulyupin
- VPFE resizer
Xiwei Wang
- can i setup Video output to display YUV420 planar data?
Steve Yeh
- Writing a resizer driver
Carlos Ojea
- VPFE resizer
Carlos Ojea
- can i setup Video output to display YUV420 planar data?
Hadli, Manjunath
- DirectFB
Lloyd Sargent
- Should 'git clone' work using HTTP?
T Ziomek
- LCD interface
Heath Holcomb
- Should 'git clone' work using HTTP?
Komal Shah
- VPFE resizer configuration
Carlos Ojea
- [PATCH] ARM: DaVinci: Clock fwk sem2mutex conversion
Komal Shah
- [PATCH 1/2] ARM: DaVinci: Add common.h and cleanup serial.c
Komal Shah
- [PATCH 2/2] ARM: DaVinci: Move davinci_clk_init to
davinci_init_common_hw()
Komal Shah
- [PATCH] ARM: DaVinci: Add devices.c and Fix I2C related
KConfig entries
Kevin Hilman
- [PATCH] ARM: DaVinci: Clock fwk sem2mutex conversion
Kevin Hilman
- [PATCH 1/2] ARM: DaVinci: Add common.h and cleanup serial.c
Kevin Hilman
- [PATCH 2/2] ARM: DaVinci: Move davinci_clk_init to
davinci_init_common_hw()
Kevin Hilman
- Should 'git clone' work using HTTP?
Kevin Hilman
- source.mvista.com git update
Kevin Hilman
- Should 'git clone' work using HTTP?
T Ziomek
- Should 'git clone' work using HTTP?
Kevin Hilman
- Web Video Server on DaVinci
Chunhong Ji
- Missing stuff in the mvista git?
Alex Shnitman
- Missing stuff in the mvista git?
Komal Shah
- Missing stuff in the mvista git?
Alex Shnitman
- Missing stuff in the mvista git?
Komal Shah
- VPFE resizer configuration
Carlos Ojea
- Linux Driver for TVP5160
rajan rai
- git tree rebase
Jose Lozano
- Missing stuff in the mvista git?
Maughan, Thomas
- VPFE resizer configuration
Maughan, Thomas
- Missing stuff in the mvista git?
Kevin Hilman
- git tree rebase
Kevin Hilman
- Missing stuff in the mvista git?
Heath Holcomb
- Missing stuff in the mvista git?
Heath Holcomb
- VPFE resizer configuration
Lloyd Sargent
- Missing stuff in the mvista git?
Maughan, Thomas
- Missing stuff in the mvista git?
T Ziomek
- virtual to physical memory conversion
Carlos Ojea
- 264 decoder on windows
Chunhong Ji
- 264 decoder on windows
Mark Chambers
- build newest knernel error!
feng zhu
- build newest knernel error!
Kevin Hilman
- Using flash in Linux
kzafeiropoul at micron.com
- EVM flash contents
Wong, Vincent
- Host Driver of SD Card in MVista
Shreshtha
- build newest knernel error!
feng zhu
- Host Driver of SD Card in MVista
Maughan, Thomas
- How to build new kernel form
git://source.mvista.com/git/linux-davinci-2.6.git ?
feng zhu
- about:DVEVM compile
stephen
- about:DVEVM compile
Carlos Ojea
- crash at done,booting the linux
Carlos Ojea
- Host Driver of SD Card in MVista
Heath Holcomb
- Access to GPIO registers
Eric van Uden
- RESET
Carlos Ojea
- Host Driver of SD Card in MVista
Maughan, Thomas
- about:DVEVM compile
Ring, Chris
- How to build new kernel form
git://source.mvista.com/git/linux-davinci-2.6.git
Preissig, Steve
- Host Driver of SD Card in MVista
Pham, Huy
- Should 'git clone' work using HTTP?
Hunter, Jon
- about:PAL
stephen
- Procedure for Bringing up an apparently dead board
Tom Mackenzie
- Frame buffer confusion...
Lloyd Sargent
- Procedure for Bringing up an apparently dead board (Tom Mackenzie)
Preissig, Steve
- about:PAL
Preissig, Steve
- Frame buffer confusion...
Carlos Ojea
- Frame buffer confusion...
Carlos Ojea
- How to diable ARM's cache access
a-ohkubo at bq.jp.nec.com
- Procedure for Bringing up an apparently dead board (Tom
Mackenzie)
Tom Mackenzie
- Frame buffer confusion...
Lloyd Sargent
- git tree updated to v2.6.17
Kevin Hilman
- MTD driver setup
kzafeiropoul at micron.com
- uboot source?
Komal Shah
- [PATCH] ARM: DaVinci: Update clock framework
Komal Shah
- [PATCH] ARM: DaVinci: Add read/write[bwl] and _REG* macros.
Komal Shah
- [PATCH] ARM: DaVinci: Update davinci_dm644x defconfig.
Komal Shah
- [PATCH] ARM: DaVinci: LEDS: Remove CONFIG_PREEMPT_RT
Komal Shah
- [PATCH] ARM: DaVinci: Move i2c-client.c to i2c chips drivers.
Komal Shah
- [PATCH] ARM: DaVinci: Move i2c-emac to drivers/net directory
Komal Shah
- [PATCH] ARM: DaVinci: Fix various warnings.
Komal Shah
- uboot source?
Komal Shah
- git repository
Frank
- git repository
Kevin Hilman
- Procedure for Bringing up an apparently dead board (Tom
Mackenzie)
Preissig, Steve
- Need the u-boot source
Frank
- how to set oss card one channel
jp_liu
- Need the u-boot source
Carlos Ojea
- cross compiling with cstdlib error
Chunhong Ji
- cross compiling with cstdlib error
Chunhong Ji
- cross compiling with cstdlib error
jp_liu
- Need the u-boot source
Frank
- git tree updated to v2.6.17
Hunter, Jon
- git tree updated to v2.6.17
Komal Shah
- compiling error
karl beldan
- how to get a '.x64P' file
Carlos Ojea
- Building boost library by DVEM-supplied compiler
Kirill Sukhonosenko
- git tree updated to v2.6.17
Hunter, Jon
- how to get a '.x64P' file
Preissig, Steve
- git tree updated to v2.6.17
Komal Shah
- git tree updated to v2.6.17
Kevin Hilman
- git tree updated to v2.6.17
Kevin Hilman
- how to get a '.x64P' file
Carlos Ojea
- about:mp3
stephen
- What is the correct bootm setting to boot linux from flash?
Tom Mackenzie
- What is the correct bootm setting to boot linux from flash?
Hunter, Jon
- What is the correct bootm setting to boot linux from flash?
Hunter, Jon
- (no subject)
Tom Mackenzie
- What is the correct bootm setting to boot linux from flash?
Tom Mackenzie
- What is the correct bootm setting to boot linux from flash?
Tom Mackenzie
- What is the correct bootm setting to boot linux from flash?
Albert den Haan
- [Fwd: Re: What is the correct bootm setting to boot linux from
flash?]
Albert den Haan
- What is the correct bootm setting to boot linux from flash?
Tom Mackenzie
- What is the correct bootm setting to boot linux from flash?
Albert den Haan
- What is the correct bootm setting to boot linux from flash?
Albert den Haan
- [PATCH] ARM: DaVinci: Move i2c-client.c to i2c chips drivers.
Kamat, Nishant
- compiling error
karl beldan
- physical address
Carlos Ojea
Last message date:
Fri Jun 30 09:31:16 CST 2006
Archived on: Fri Jun 30 09:31:23 CST 2006
This archive was generated by
Pipermail 0.09 (Mailman edition).