August 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Aug 1 00:12:22 CDT 2010
Ending: Tue Aug 31 21:39:19 CDT 2010
Messages: 295

• Kernel Booting Problem   Tobias Waldekranz (Knutsson)
• Symbol names   Tobias Waldekranz (Knutsson)
• CHASE KIM/KR/AEKL/AAP is out of the office.   CHASE.KIM at ARROWASIA.COM
• [PATCH v5 1/1] davinci: spi: replace existing driver   Christophe Aeschlimann
• C implementation of DaVinci 4-bit NAND ECC?   Christophe Aeschlimann
• C implementation of DaVinci 4-bit NAND ECC?   Christophe Aeschlimann
• [PATCH v5 1/1] davinci: spi: replace existing driver   Caglar Akyuz
• [PATCH v5 1/1] davinci: spi: replace existing driver   Caglar Akyuz
• need help- fw_printenv& fw_setenv   Caglar Akyuz
• need help- fw_printenv& fw_setenv   Caglar Akyuz
• need help- fw_printenv& fw_setenv   Caglar Akyuz
• [PATCH 1/4] davinci: cpufreq: bailout on regulator errors   Caglar Akyuz
• [PATCH] hawkboard   Caglar Akyuz
• [PATCH] hawkboard   Caglar Akyuz
• [PATCH] hawkboard   Caglar Akyuz
• Android2.2 on DM355   Azam Ansari
• USB DVR from Shenzhen China   Hongkong Aoli
• SDIO WIFI for DM355? [Hijacked, was: Is there a USB 802.11n wifi card which suit DM6446?]   Ohad Ben-Cohen
• [RFC] nand/davinci: Fix comment to match the code   Artem Bityutskiy
• [PATCH 0/6] davinci: add support for aemif timing configuration   Artem Bityutskiy
• [PATCH 0/6] davinci: add support for aemif timing configuration   Artem Bityutskiy
• [PATCH 2/3] ASoC: DaVinci: Added support based on copy_from_user instead of DMA   Mark Brown
• MUSB: Idea: board-specific OTG ID pin interrupt support   David Brownell
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   David Brownell
• C implementation of DaVinci 4-bit NAND ECC?   David Brownell
• IPIPE issue in DM365   Albert Burbea
• IPIPE issue in DM365   Albert Burbea
• How to stop mtd char device generating ECC on writes?   Matthieu CASTET
• usb 1-1: device descriptor read/64, error -110   Stephane Cerveau
• [PATCH 0/8] split out emac cpdma and mdio for reuse   Cyril Chemparathy
• [PATCH 1/8] netdev: separate out davinci mdio controller code   Cyril Chemparathy
• [PATCH 2/8] davinci: add mdio platform devices   Cyril Chemparathy
• [PATCH 3/8] netdev: switch davinci emac to new mdio driver   Cyril Chemparathy
• [PATCH 4/8] davinci: cleanup unused davinci mdio arch code   Cyril Chemparathy
• [PATCH 5/8] netdev: cleanup unused davinci mdio emac code   Cyril Chemparathy
• [PATCH 6/8] netdev: separate out davinci cpdma controller code   Cyril Chemparathy
• [PATCH 7/8] netdev: switch davinci emac to new cpdma layer   Cyril Chemparathy
• [PATCH 8/8] netdev: cleanup unused davinci emac cpdma code   Cyril Chemparathy
• [PATCH 2/8] davinci: add mdio platform devices   Cyril Chemparathy
• [PATCH 1/8] netdev: separate out davinci mdio controller code   Cyril Chemparathy
• [PATCH 6/8] netdev: separate out davinci cpdma controller code   Cyril Chemparathy
• [PATCH] Davinci: tnetv107x: retain psc reg base after init   Cyril Chemparathy
• Symbol names   Steve Chen
• Help needed for DM365 SPI driver in DMA mode   Steve Chen
• need help- fw_printenv& fw_setenv   Steve Chen
• need help- fw_printenv& fw_setenv   Steve Chen
• ToolChain   Steve Chen
• DM6446 Drivers   Steve Chen
• mmc over SPI on DM6467 based board. card not detected.   Steve Chen
• Kernel   Steve Chen
• Kernel   Steve Chen
• FBdev On DM365IPNC not work correctly   Dongfeng
• [PATCH v5 1/1] davinci: spi: replace existing driver   Todd Fischer
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Mike Frysinger
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Mike Frysinger
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Mike Frysinger
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Ben Gardiner
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Ben Gardiner
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Ben Gardiner
• need help- fw_printenv& fw_setenv   Ben Gardiner
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   Gu George
• [PATCH 2/8] davinci: add mdio platform devices   Igor Grinberg
• [PATCH 2/8] davinci: add mdio platform devices   Igor Grinberg
• [GIT PULL] davinci updates for 2.6.36   Kevin Hilman
• [PATCH 1/2] davinci: clean up inconsistent usage of spaces in Kconfig   Kevin Hilman
• [PATCH v2 1/6] davinci: add support for aemif timing configuration   Kevin Hilman
• [PATCH 1/2] davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage   Kevin Hilman
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Kevin Hilman
• [PATCH v3] mtd-nand: davinci: correct 4-bit error correction   Kevin Hilman
• [PATCH 1/4] davinci: cpufreq: bailout on regulator errors   Kevin Hilman
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH] Davinci: tnetv107x: retain psc reg base after init   Kevin Hilman
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Kevin Hilman
• [PATCH v4] DaVinci: dm365: Added clockout2 management.   Kevin Hilman
• [PATCH v2 1/6] davinci: add support for aemif timing configuration   Kevin Hilman
• How to exit this group?please   Kevin Hilman
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Kevin Hilman
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Kevin Hilman
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Kevin Hilman
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH v2] davinci: I2C: Adding bus frequency as module parameter   Kevin Hilman
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Kevin Hilman
• [PATCH 0/6] davinci: add support for aemif timing configuration   Kevin Hilman
• [PATCH v2 0/3] Add support for second MMCSD controller for DA-850   Kevin Hilman
• [PATCH 1/5] arm: mach-davinci: check irq2ctlr() result   Kevin Hilman
• [PATCH 0/8] split out emac cpdma and mdio for reuse   Kevin Hilman
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Kevin Hilman
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH v3 0/3] Add support for second MMCSD controller for DA-850   Kevin Hilman
• davinci git updated to v2.6.36-rc2, patchwork updated   Kevin Hilman
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH] davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue   Kevin Hilman
• Change in UART configuration   Kevin Hilman
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Kevin Hilman
• [PATCH 0/6] davinci: add support for aemif timing configuration   Kevin Hilman
• [PATCH 1/4] davinci: cpufreq: bailout on regulator errors   Kevin Hilman
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH 0/6] davinci: add support for aemif timing configuration   Kevin Hilman
• [PATCH v1] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• ToolChain   Brian Hutchinson
• Problem booting with a omapl138 sdram board   Marc-André Hébert
• The type of the Noise filter in DM355   Han Jun-peng
• [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer   Greg KH
• [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer   Greg KH
• mmc over SPI on DM6467 based board. card not detected.   Sumesh Kaana
• [PATCH v2 0/3] Add support for second MMCSD controller for DA-850   Juha Kuikka
• [PATCH v2 1/3] DA850: Add LPSC id for MMCSD1 peripheral   Juha Kuikka
• [PATCH v2 2/3] DA850: Split MMCSD clock into two to support both MMCSD peripherals   Juha Kuikka
• [PATCH v2 3/3] DA850: Add MMCSD1 resources, platform device and convenience registration function   Juha Kuikka
• [PATCH v3 0/3] Add support for second MMCSD controller for DA-850   Juha Kuikka
• [PATCH v3 1/3] DA850: Add LPSC id for MMCSD1 peripheral   Juha Kuikka
• [PATCH v3 2/3] DA850: Split MMCSD clock into two to support both MMCSD peripherals   Juha Kuikka
• [PATCH v3 3/3] DA850: Add MMCSD1 resources, platform device and convenience registration function   Juha Kuikka
• [PATCH v5 1/1] davinci: spi: replace existing driver   Grant Likely
• [PATCH v5 1/1] davinci: spi: replace existing driver   Grant Likely
• [PATCH v5 1/1] davinci: spi: replace existing driver   Grant Likely
• [PATCH v5 1/1] davinci: spi: replace existing driver   Grant Likely
• Touchscreen - MFD driver for TPS6507x family   Nicolas Luna
• Touchscreen - MFD driver for TPS6507x family   Nicolas Luna
• Boot time   Nicolas Luna
• Boot time   Nicolas Luna
• Unhandled USB IRQ   Nicolas Luna
• Unhandled USB IRQ   Nicolas Luna
• Problem with 256MB DDR on DM365   Hank Magnuski
• Problem with 256MB DDR on DM365   Hank Magnuski
• DM365 - Watchdog Timer   Hank Magnuski
• steps to compile UBL?   Meng, Chris
• [PATCH v5 1/1] davinci: spi: replace existing driver   Brian Niebuhr
• [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Nori, Sekhar
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Nori, Sekhar
• Touchscreen - MFD driver for TPS6507x family   Nori, Sekhar
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Nori, Sekhar
• Touchscreen - MFD driver for TPS6507x family   Nori, Sekhar
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Nori, Sekhar
• [PATCH v3] DaVinci: dm365: Added clockout2 management.   Nori, Sekhar
• [PATCH] davinci: I2C: Adding bus frequency as module parameter   Nori, Sekhar
• [rtc-linux] RE: [PATCH v2] rtc: omap: let device wakeup capability be configured from chip init logic   Nori, Sekhar
• [PATCH v2 1/6] davinci: add support for aemif timing configuration   Nori, Sekhar
• [PATCH 0/6] davinci: add support for aemif timing configuration   Sekhar Nori
• [PATCH v3 1/6] davinci: add support for aemif timing configuration   Sekhar Nori
• [PATCH v2 2/6] nand: davinci: add support for timing configuration   Sekhar Nori
• [PATCH 3/6] davinci: dm644x evm: setup NAND flash timing   Sekhar Nori
• [PATCH 4/6] davinci: am17x/da830/omap-l137 evm: setup NAND flash timing   Sekhar Nori
• [PATCH 5/6] davinci: am18x/da850/omap-l138 evm: setup NAND flash timing   Sekhar Nori
• [PATCH v2 6/6] davinci: dm6467t evm: setup NAND flash timing   Sekhar Nori
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Nori, Sekhar
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Nori, Sekhar
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Nori, Sekhar
• [PATCH 0/4] Add support for second MMCSD controller for DA-850   Nori, Sekhar
• [PATCH 1/4] DA850: Add LPSC id for MMCSD1   Nori, Sekhar
• [PATCH 2/4] DA8xx: Add MMCSD1 base and device registration function   Nori, Sekhar
• [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
• [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
• SDIO WIFI for DM355? [Hijacked, was: Is there a USB 802.11n wifi card which suit DM6446?]   Nori, Sekhar
• Problem booting with a omapl138 sdram board   Nori, Sekhar
• [PATCH v2 RESEND] rtc: omap: let device wakeup capability be configured from chip init logic   Sekhar Nori
• [PATCH] davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue   Sekhar Nori
• [PATCH v4] DaVinci: dm365: Added clockout2 management.   Nori, Sekhar
• [PATCH 1/4] davinci: cpufreq: bailout on regulator errors   Nori, Sekhar
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Nori, Sekhar
• [PATCH] hawkboard   Nori, Sekhar
• [PATCH v1] davinci: Initial support for MityDSP-L138/MityARM-1808   Nori, Sekhar
• [PATCH v1] davinci: Initial support for MityDSP-L138/MityARM-1808   Nori, Sekhar
• mmcqd taking up a lot of CPU?   Jeremy Noring
• Fwd: Re: DM6446 Drivers   Özgür Ozan
• How to exit this group?please   Vladimir Pantelic
• test mail.   Krunal Patil
• test mail.   Krunal Patil
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   Pedanekar, Hemant
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   Pedanekar, Hemant
• Linux Usb key and Fat buffer.   Pierre
• Linux Usb key and Fat buffer.   Jon Povey
• How to stop mtd char device generating ECC on writes?   Jon Povey
• How to stop mtd char device generating ECC on writes?   Jon Povey
• C implementation of DaVinci 4-bit NAND ECC?   Jon Povey
• SDIO WIFI for DM355? [Hijacked, was: Is there a USB 802.11n wifi card which suit DM6446?]   Jon Povey
• DM365 - Watchdog Timer   Jon Povey
• DM365 - Watchdog Timer   Jon Povey
• Reduced drive operation for the DDR2 SDRAM device   Priya Raghavendra
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Sudhakar Rajashekhara
• [PATCH v2] m25p80: add support for a callback to platform code on successful device probe   Sudhakar Rajashekhara
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Sudhakar Rajashekhara
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Sudhakar Rajashekhara
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Sudhakar Rajashekhara
• [RFC] nand/davinci: Fix comment to match the code   Sudhakar Rajashekhara
• [RFC] nand/davinci: Fix comment to match the code   Sudhakar Rajashekhara
• No subject   Raghu Ramaraj
• need help- fw_printenv& fw_setenv   Raghu Ramaraj
• need help- fw_printenv& fw_setenv   Raghu Ramaraj
• need help- fw_printenv& fw_setenv   Raghu Ramaraj
• need help- fw_printenv& fw_setenv   Raghu Ramaraj
• need help- fw_printenv& fw_setenv   Raghu Ramaraj
• [PATCH 1/8] netdev: separate out davinci mdio controller code   Ramirez Luna, Omar
• [PATCH 6/8] netdev: separate out davinci cpdma controller code   Ramirez Luna, Omar
• [PATCH v3] DaVinci: dm365: Added clockout2 management.   Raffaele Recalcati
• [PATCH v3] DaVinci: dm365: Added clockout2 management.   Raffaele Recalcati
• [PATCH v4] DaVinci: dm365: Added clockout2 management.   Raffaele Recalcati
• [PATCH v4] DaVinci: dm365: Added clockout2 management.   Raffaele Recalcati
• [PATCH v4] DaVinci: dm365: Added clockout2 management.   Raffaele Recalcati
• Problem with 256MB DDR on DM365   Ring, Chris
• Change in UART configuration   Victor Rodriguez
• Kernel   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• Problem git send patch   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard   Victor Rodriguez
• [PATCH] hawkboard v_2   Victor Rodriguez
• [PATCH] hawkboard v_2   Victor Rodriguez
• Kernel   Viral Sachde
• Kernel   Viral Sachde
• [RFC] nand/davinci: Fix comment to match the code   Wolfram Sang
• [RFC] nand/davinci: Fix comment to match the code   Wolfram Sang
• [RFC] nand/davinci: Fix comment to match the code   Wolfram Sang
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Santosh Shilimkar
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Shilimkar, Santosh
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Sergei Shtylyov
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Sergei Shtylyov
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Sergei Shtylyov
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Sergei Shtylyov
• [PATCH 2/2] DA850: move MII/RMII pin lists to the board file   Sergei Shtylyov
• [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer   Sergei Shtylyov
• [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer   Sergei Shtylyov
• [PATCH] m25p80: add support for a callback to platform code on successful device probe   Sergei Shtylyov
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Sergei Shtylyov
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Sergei Shtylyov
• [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer   Sergei Shtylyov
• [PATCH 4/4] DA8xx: Add MMCSD1 resources, platform device and convenience registration function   Sergei Shtylyov
• [PATCH v2 3/3] DA850: Add MMCSD1 resources, platform device and convenience registration function   Sergei Shtylyov
• Unhandled USB IRQ   Sergei Shtylyov
• [PATCH] hawkboard   Sergei Shtylyov
• Boot time   Constantine Shulyupin
• GIT Kernel and CMEM 2.25.04.10   Raúl Sánchez Siles
• Is there a USB 802.11n wifi card which suit DM6446?   Subbrathnam, Swaminathan
• SDIO WIFI for DM355? [Hijacked, was: Is there a USB 802.11n wifi card which suit DM6446?]   Subbrathnam, Swaminathan
• Android2.2 on DM355   Syed Mohammed, Khasim
• [PATCH] hawkboard   Syed Mohammed, Khasim
• DSP/BIOS Link for GIT Kernel   Uppal, Deepali
• [PATCH 1/2] DA850: move NAND/NOR pin lists to the board file   Michael Williamson
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH 2/2] davinci: am18x/da850/omap-l138: add support for higher frequencies   Michael Williamson
• [PATCH v3] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH v4] davinci: Add MityDSP-L138/MityARM-1808 SOM support   Michael Williamson
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH v1] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH v1] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• [PATCH] davinci: Add machine checks to DA8XX serial console init routines   Michael Williamson
• [PATCH] davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.   Michael Williamson
• [PATCH v2] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
• DM6446 Drivers   Özgür Ozan Yusufoğlu
• Driver   özgür Ozan Yusufoğlu
• Flash Enabled Web Browser   amr ali
• [PATCH 0/4] Add support for second MMCSD controller for DA-850   Juha.Kuikka at elektrobit.com
• [PATCH 1/4] DA850: Add LPSC id for MMCSD1   Juha.Kuikka at elektrobit.com
• [PATCH 2/4] DA8xx: Add MMCSD1 base and device registration function   Juha.Kuikka at elektrobit.com
• [PATCH 3/4] DA850: Split MMCSD clock into two to support both MMCSD peripherals   Juha.Kuikka at elektrobit.com
• [PATCH 4/4] DA8xx: Add MMCSD1 resources, platform device and convenience registration function   Juha.Kuikka at elektrobit.com
• No subject   bharat gohil
• Demo of DM6467T   harry_cat
• IPIPE issue in DM365   hitesh
• IPIPE issue in DM365   hitesh
• Problem with 256MB DDR on DM365   hitesh
• Problem with 256MB DDR on DM365   hitesh
• Problem with 256MB DDR on DM365   hitesh
• Problem with 256MB DDR on DM365   hitesh
• Is there a USB 802.11n wifi card which suit DM6446?   huangsw
• dm365 h264dec buf usage problem   johnny
• ToolChain   chetan patil
• Kernel   chetan patil
• Help needed for DM365 SPI driver in DMA mode   pratik.joshi
• How to exit this group?please   seek_for
• How to configure DDR2??   rohan tabish
• configuring RAM with 16bit?   rohan tabish
• Booting linux for DDR2 with 16bit bus width   rohan tabish
• steps to compile UBL?   rohan tabish
• steps to compile UBL?   rohan tabish
• Problem with 256MB DDR on DM365   rohan tabish
• [PATCH v2] davinci: I2C: Adding bus frequency as module parameter   vishwa
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   wenaideyu wenaideyu
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   wenaideyu wenaideyu
• The 6467t evm goes to reset immediately after the switching to PCI mode from nand   wenaideyu wenaideyu
• unsubscribe from the mail list   秦瑞
• Multiple NAND chips on OMAPL137   詹成江

Last message date: Tue Aug 31 21:39:19 CDT 2010
Archived on: Fri Sep 10 09:10:51 CDT 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...