October 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Oct 1 05:48:37 CDT 2010
Ending: Fri Oct 29 10:10:45 CDT 2010
Messages: 408

• [PATCH v1] davinci: sound support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v1] davinci: sound support for Omapl138-Hawkboard   Sergei Shtylyov
• [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   Sergei Shtylyov
  • [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   Caglar Akyuz
    • [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   Victor Rodriguez
      • [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   Sergei Shtylyov
      • [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v1] davinci: sound support for Omapl138-Hawkboard   Caglar Akyuz
• [PATCH 00/47] davinci queue for 2.6.37   Kevin Hilman
  • [PATCH 01/47] davinci: da850 evm: sparse cleanup: make file local variables static   Kevin Hilman
  • [PATCH 02/47] MAINTAINERS: Add Kevin's e-mail in entry for TI DaVinci   Kevin Hilman
  • [PATCH 03/47] davinci: clock: make 'disable unused clocks' printk debug only   Kevin Hilman
  • [PATCH 04/47] davinci: cpufreq: bailout on regulator errors   Kevin Hilman
  • [PATCH 05/47] davinci: clean up inconsistent usage of spaces in Kconfig   Kevin Hilman
  • [PATCH 06/47] davinci: introduce support for AM1x ARM9 microprocessors   Kevin Hilman
  • [PATCH 07/47] davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage   Kevin Hilman
  • [PATCH 08/47] davinci: dm365: disable pulldowns for all MMC/SD1 pins.   Kevin Hilman
  • [PATCH 09/47] davinci: clock: add support for setting sysclk rate   Kevin Hilman
  • [PATCH 10/47] davinci: cpufreq: add support for keeping an additional clock constant   Kevin Hilman
  • [PATCH 11/47] davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq   Kevin Hilman
  • [PATCH 12/47] Davinci: tnetv107x: retain psc reg base after init   Kevin Hilman
  • [PATCH 13/47] DA850: move NAND/NOR pin lists to the board file   Kevin Hilman
  • [PATCH 14/47] DA850: move MII/RMII pin lists to the board file   Kevin Hilman
  • [PATCH 15/47] arm: mach-davinci: check irq2ctlr() result   Kevin Hilman
  • [PATCH 16/47] DA850: Add LPSC id for MMCSD1 peripheral   Kevin Hilman
  • [PATCH 17/47] DA850: Split MMCSD clock into two to support both MMCSD peripherals   Kevin Hilman
  • [PATCH 18/47] DA850: Add MMCSD1 resources, platform device and convenience registration function   Kevin Hilman
  • [PATCH 19/47] davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue   Kevin Hilman
  • [PATCH 20/47] davinci: add support for aemif timing configuration   Kevin Hilman
  • [PATCH 21/47] nand: davinci: add support for timing configuration   Kevin Hilman
  • [PATCH 22/47] davinci: dm644x evm: setup NAND flash timing   Kevin Hilman
  • [PATCH 23/47] davinci: am17x/da830/omap-l137 evm: setup NAND flash timing   Kevin Hilman
  • [PATCH 24/47] davinci: am18x/da850/omap-l138 evm: setup NAND flash timing   Kevin Hilman
  • [PATCH 25/47] davinci: dm6467t evm: setup NAND flash timing   Kevin Hilman
  • [PATCH 26/47] davinci: Add machine checks to DA8XX serial console init routines   Kevin Hilman
  • [PATCH 27/47] davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.   Kevin Hilman
  • [PATCH 28/47] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
  • [PATCH 29/47] davinci: add idcode for tnetv107x rev 1.1/1.2   Kevin Hilman
  • [PATCH 30/47] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Kevin Hilman
  • [PATCH 31/47] net: davinci_emac: separate out davinci mdio   Kevin Hilman
  • [PATCH 32/47] davinci: add mdio platform devices   Kevin Hilman
  • [PATCH 33/47] omap: add mdio platform devices   Kevin Hilman
  • [PATCH 34/47] net: davinci_emac: switch to new mdio   Kevin Hilman
  • [PATCH 35/47] davinci: cleanup mdio arch code and switch to phy_id   Kevin Hilman
  • [PATCH 36/47] omap: cleanup unused davinci mdio arch code   Kevin Hilman
  • [PATCH 37/47] net: davinci_emac: cleanup unused mdio emac code   Kevin Hilman
  • [PATCH 38/47] net: davinci_emac: separate out cpdma code   Kevin Hilman
  • [PATCH 39/47] net: davinci_emac: switch to new cpdma layer   Kevin Hilman
  • [PATCH 40/47] net: davinci_emac: cleanup unused cpdma code   Kevin Hilman
    • Kernel panic in cppi_completion   Suhas Jain
  • [PATCH 41/47] input: add driver for tnetv107x on-chip keypad controller   Kevin Hilman
  • [PATCH 42/47] davinci: add tnetv107x keypad platform device   Kevin Hilman
  • [PATCH 43/47] davinci: add keypad config for tnetv107x evm board   Kevin Hilman
  • [PATCH 44/47] input: add driver for tnetv107x touchscreen controller   Kevin Hilman
  • [PATCH 45/47] davinci: add tnetv107x touchscreen platform device   Kevin Hilman
  • [PATCH 46/47] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
  • [PATCH 47/47] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
• [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Kevin Hilman
  • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
    • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Kevin Hilman
• [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Caglar Akyuz
  • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
• problem with serial console   kunal singh
  • problem with serial console   kunal singh
    • problem with serial console   Raffaele Recalcati
• Compiling Sample code in SDK.   chetan patil
  • Compiling Sample code in SDK.   Steve Poulsen
• [PATCH 1/1] ALSA: ASoc: DaVinci Delay start of ASP to trigger   martin at ti.com
  • [alsa-devel] [PATCH 1/1] ALSA: ASoc: DaVinci Delay start of ASP to trigger   Liam Girdwood
  • [PATCH 1/1] ALSA: ASoc: DaVinci Delay start of ASP to trigger   Mark Brown
• Trying to move from 1.3x dsplink to 1.65 (does ips.h replace shm_ips.h)   Uppal, Deepali
• [PATCH 5/5] arm/davinci: remove duplicated include   Nicolas Kaiser
• Adding a library (libusb) to the toolchain for cross-compilation - Working with DM6446   Tobias Waldekranz
• [PATCH 5/5] arm/davinci: remove duplicated include   Kevin Hilman
• [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Nori, Sekhar
    • [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v1] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1] davinci: EDMA support for Omapl138-Hawkboard   Nori, Sekhar
• Error while decoding using ./moduletest.out alg_vidDec   Suresh Somasekharappa
  • Error while decoding using ./moduletest.out alg_vidDec   Ring, Chris
  • Error while decoding using ./moduletest.out alg_vidDec   Saxena, Anshuman
• [PATCH] davinci: Implement sched_clock()   Andreas.Gaer at baslerweb.com
  • [PATCH] davinci: Implement sched_clock()   Kevin Hilman
• [PATCH] davinci: Implement sched_clock()   Andreas.Gaer at baslerweb.com
  • [PATCH] davinci: Implement sched_clock()   Kevin Hilman
    • [PATCH] davinci: Implement sched_clock()   Sergei Shtylyov
      • [PATCH] davinci: Implement sched_clock()   Kevin Hilman
  • [PATCH] davinci: Implement sched_clock()   Alper YILDIRIM
    • AW: [PATCH] davinci: Implement sched_clock()   Gaer, A.
• [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
  • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
  • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
    • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
• SATA support   Victor Rodriguez
  • SATA support   Sergei Shtylyov
• Copy to SD card gets stuck   arun thomas whitchurch
• [PATCH v4] i2c: davinci: Fix race when setting up for TX   Jon Povey
  • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
    • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Jon Povey
• OMAP3530 troubles - jittery video, performance   Itay C
• [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x   Savinay Dharmappa
• [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Savinay Dharmappa
  • [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Sergei Shtylyov
    • [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Nori, Sekhar
      • [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Vitaly Wool
      • [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Sergei Shtylyov
      • [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Vitaly Wool
• Davinci-linux-open-source Digest, Vol 58, Issue 22   Mitch Rybczynski
• SATA support   Victor Rodriguez
  • SATA support   Subbrathnam, Swaminathan
    • SATA support   Victor Rodriguez
• Error while decoding using ./moduletest.out alg_vidDec   Suresh Somasekharappa
• [PATCH 2/2] davinci: Platform support for OMAP-L137/AM17x NOR flash driver   Nori, Sekhar
• [PATCH 0/4] Add eCAP driver support for PWM based backlight control.   sugumar
• [PATCH 1/4] davinci: da8xx: eCAP driver for PWM signal generation   sugumar
• [PATCH 2/4] davinci: da850: Add platform specific support for eCAP driver   sugumar
• [PATCH 3/4] Modify the back light driver to support the new PWM framework   sugumar
• [PATCH 4/4] davinci: da850/omap-l138 evm: Platform support for backlight driver   sugumar
• [PATCH v1 0/6] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
  • [PATCH v1 0/6] Add Omapl138-Hawkboard support   Kevin Hilman
    • [PATCH v1 0/6] Add Omapl138-Hawkboard support   Victor Rodriguez
• [PATCH v1 1/6] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v1 2/6] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v1 3/6] ASoC: davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v1 3/6] ASoC: davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1 3/6] ASoC: davinci: ASoC support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v1 4/6] davinci: SOUND support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1 4/6] davinci: SOUND support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   Sergei Shtylyov
      • [PATCH v1 5/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v1 6/6] davinci: USB-OHCI support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v1 6/6] davinci: USB-OHCI support for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v1 6/6] davinci: USB-OHCI support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v1 6/6] davinci: USB-OHCI support for Omapl138-Hawkboard   Victor Rodriguez
• net example?   Andrea Gasparini
  • net example?   Raffaele Recalcati
• Error when using openRTSP of wis-streamer on DM365 IPNC   Suresh Somasekharappa
• dm6467 arm side interupt   自由人
• UART - RTS and CTS on DA850   Timor Knudsen
• [PATCH v2 00/10] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
• [PATCH v2 01/10] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 02/10] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 03/10] davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 04/10] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 05/10] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 06/10] davinci: MMC/SD configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 07/10] davinci: MMC/SD support for Omapl138-Hawkboar   vm.rod25 at gmail.com
• [PATCH v2 08/10] davinci: USB1.1 clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v2 08/10] davinci: USB1.1 clocks for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v2 09/10] davinci: USB1.1 GPIOs for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 10/10] davinci: USB-OHCI support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 10/10] davinci: USB-OHCI support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v2 10/10] davinci: USB-OHCI support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH] i2c: davinci: Fix TX setup for more SoCs   Jon Povey
  • [PATCH] i2c: davinci: Fix TX setup for more SoCs   Kevin Hilman
  • [PATCH] i2c: davinci: Fix TX setup for more SoCs   Ben Dooks
• [PATCH] davinci: mityomapl138: make file local data static   Sekhar Nori
  • [PATCH] davinci: mityomapl138: make file local data static   Kevin Hilman
• OMAP-L138 to AM1808   Nicolas Luna
  • OMAP-L138 to AM1808   Victor Rodriguez
    • OMAP-L138 to AM1808   Nicolas Luna
• OMAP-L138 to AM1808   Nicolas Luna
  • OMAP-L138 to AM1808   Nori, Sekhar
• VIDENC1_process takes 40 ms   Yuvraj Pasi
• [PATCH v3 0/9] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
• [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   Sergei Shtylyov
      • [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard   yj2133011
• [PATCH v3 2/9] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v3 2/9] davinci: EDMA support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v3 3/9] davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v3 4/9] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v3 5/9] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v3 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v3 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v3 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   vm.rod25 at gmail.com
• [PATCH v3 8/9] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v3 9/9] davinci: USB-OHCI support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v3 9/9] davinci: USB-OHCI support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
  • [PATCH 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
    • [PATCH 04/12] spi: add ti-ssp spi master driver   Grant Likely
  • [PATCH 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
  • [PATCH 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
    • [PATCH 06/12] regulator: add driver for tps6524x regulator   Mark Brown
      • [PATCH 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
    • [PATCH 06/12] regulator: add driver for tps6524x regulator   Mark Brown
  • [PATCH 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
    • [PATCH 07/12] davinci: add tnetv107x evm regulators   Mark Brown
  • [PATCH 08/12] gpio: add ti-ssp virtual gpio driver   Cyril Chemparathy
  • [PATCH 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
  • [PATCH 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
  • [PATCH 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
  • [PATCH 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
  • [PATCH 01/12] misc: add driver for sequencer serial port   Grant Likely
    • [PATCH 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
      • [PATCH 01/12] misc: add driver for sequencer serial port   Grant Likely
• [PATCH 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• Problem with UART1 on Davinci with OMAP-L138 ?   Nicolas Luna
  • Problem with UART1 on Davinci with OMAP-L138 ?   Victor Rodriguez
    • Problem with UART1 on Davinci with OMAP-L138 ?   Nicolas Luna
      • Problem with UART1 on Davinci with OMAP-L138 ?   Victor Rodriguez
      • Problem with UART1 on Davinci with OMAP-L138 ?   Nicolas Luna
      • Problem with UART1 on Davinci with OMAP-L138 ?   Victor Rodriguez
  • Problem with UART1 on Davinci with OMAP-L138 ?   yj2133011
• [PATCH v4 0/9] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
  • [PATCH v4 0/9] Add Omapl138-Hawkboard support   yj2133011
• [PATCH v4 1/9] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v4 1/9] davinci: EMAC support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v4 2/9] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v4 3/9] davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v4 4/9] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v4 5/9] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v4 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   vm.rod25 at gmail.com
  • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Sergei Shtylyov
    • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Victor Rodriguez
      • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Jon Povey
      • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Victor Rodriguez
      • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Jon Povey
      • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Cyril Chemparathy
      • [PATCH v4 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Victor Rodriguez
• [PATCH v4 8/9] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v4 8/9] davinci: USB clocks for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v4 8/9] davinci: USB clocks for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v4 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v4 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   Sergei Shtylyov
    • [PATCH v4 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   Victor Rodriguez
• Davinci-linux-open-source Digest, Vol 58, Issue 52   张
• DM365 OV5642 interface: No video data.   Krunal Patil
• [PATCH v2 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
  • [PATCH v2 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
    • [PATCH v2 01/12] misc: add driver for sequencer serial port   Grant Likely
  • [PATCH v2 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
  • [PATCH v2 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v2 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
    • [PATCH v2 04/12] spi: add ti-ssp spi master driver   Grant Likely
  • [PATCH v2 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
  • [PATCH v2 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
    • [PATCH v2 06/12] regulator: add driver for tps6524x regulator   Mark Brown
  • [PATCH v2 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
  • [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver   Cyril Chemparathy
    • [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver   Grant Likely
    • [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver   David Brownell
      • [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver   Cyril Chemparathy
      • [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver   David Brownell
  • [PATCH v2 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
  • [PATCH v2 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
  • [PATCH v2 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
  • [PATCH v2 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
  • [PATCH v2 00/12] tnetv107x ssp driver stack   Kevin Hilman
• Firewire on dm6467   Sumesh Kaana
• NAND BOOT FAILUER, Why?   Billy Chang
• [PATCH v5 0/9] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
  • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Rene Gonzalez
    • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Nori, Sekhar
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Nori, Sekhar
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Nori, Sekhar
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Sergei Shtylyov
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v5 2/9] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 2/9] davinci: EDMA support for Omapl138-Hawkboard   Rene Gonzalez
  • [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   Rene Gonzalez
    • [alsa-devel] [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   Mark Brown
      • [alsa-devel] [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   Victor Rodriguez
      • [alsa-devel] [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   Mark Brown
  • [PATCH v5 4/9] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Rene Gonzalez
  • [PATCH v5 5/9] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 5/9] davinci: Audio support for Omapl138-Hawkboard   Rene Gonzalez
  • [PATCH v5 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   Rene Gonzalez
  • [PATCH v5 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   vm.rod25 at gmail.com
    • [PATCH v5 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   Rene Gonzalez
  • [PATCH v5 8/9] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 8/9] davinci: USB clocks for Omapl138-Hawkboard   Rene Gonzalez
  • [PATCH v5 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
    • [PATCH v5 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   Rene Gonzalez
  • [alsa-devel] [PATCH v5 0/9] Add Omapl138-Hawkboard support   Liam Girdwood
• SPI support, kernel stability   Jeff Graham
• How to reply a tested by for a patch   Rene Gonzalez
  • How to reply a tested by for a patch   Kevin Hilman
• [PATCH 0/2] davinci: clock control fixes   Cyril Chemparathy
  • [PATCH 2/2] davinci: minor tnetv107x clock tree fixes   Cyril Chemparathy
  • [PATCH 0/2] davinci: clock control fixes   Kevin Hilman
• [PATCH 1/2] davinci: use divide ratio limits from pll_data   Cyril Chemparathy
• [PATCH v3 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
  • [PATCH v3 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
  • [PATCH v3 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v3 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
  • [PATCH v3 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
  • [PATCH v3 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
  • [PATCH v3 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
  • [PATCH v3 08/12] gpio: add ti-ssp virtual gpio driver   Cyril Chemparathy
  • [PATCH v3 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
  • [PATCH v3 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
    • [PATCH v3 10/12] backlight: add support for tps6116x controller   Joe Perches
  • [PATCH v3 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
  • [PATCH v3 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
  • [PATCH v3 00/12] tnetv107x ssp driver stack   Kevin Hilman
    • [PATCH v3 00/12] tnetv107x ssp driver stack   Andrew Morton
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
  • [PATCH v3 01/12] misc: add driver for sequencer serial port   Andrew Morton
    • [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
      • [PATCH v3 01/12] misc: add driver for sequencer serial port   Arnd Bergmann
      • [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
      • [PATCH v3 01/12] misc: add driver for sequencer serial port   Russell King - ARM Linux
  • [PATCH v3 01/12] misc: add driver for sequencer serial port   Alan Cox
    • [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• I want to get the address to download the package of Davinci-linux-open-source   suk2010 at sina.cn
  • I want to get the address to download the package ofDavinci-linux-open-source   Jon Povey
• general steps to configure a platform device in DA830/OMAP-L137   Claudia Rodriguez Brasicott
• [alsa-devel] [PATCH v5 3/9] davinci: ASoC support for Omapl138-Hawkboard   Victor Rodriguez
• Gnash on TI   amr ali
  • Gnash on TI   Alberto Navatta
  • DM6446 and WVGA display problem   Alberto Navatta
    • DM6446 and WVGA display problem   Caglar Akyuz
• Problem with new SPI driver   Marc-André Hébert
  • Problem with new SPI driver   Marc-André Hébert
    • Problem with new SPI driver   Nori, Sekhar
      • Problem with new SPI driver   Marc-André Hébert
• [PATCH] davinci: simplify if-statement   Nicolas Kaiser
• [GIT PULL] davinci updates for 2.6.37   Kevin Hilman
• what about DM368 and TMS320C6A8167?   Ottavio Campana
• Default   chetan patil
• [PATCH v4 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
  • [PATCH v4 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
    • [PATCH v4 01/12] misc: add driver for sequencer serial port   Linus Walleij
  • [PATCH v4 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
  • [PATCH v4 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v4 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
  • [PATCH v4 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
  • [PATCH v4 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
  • [PATCH v4 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
  • [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
  • [PATCH v4 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
  • [PATCH v4 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
  • [PATCH v4 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
  • [PATCH v4 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• NFS   chetan patil
  • NFS   Victor Rodriguez
• unsubscribe   Tom Bruno
• My bootargs...that messed up.   chetan patil
• Problem with new SPI driver   david.kondrad at legrand.us
  • Problem with new SPI driver   Marc-André Hébert
  • Problem with new SPI driver   Andrew Elder
    • Problem with new SPI driver   Marc-André Hébert
• NFS   Victor Rodriguez
• NFS   chetan patil
  • NFS   Steve Chen
• NFS   Steve Chen
  • NFS   chetan patil
  • NFS   Victor Rodriguez
• NFS   Steve Chen
  • NFS   chetan patil
    • NFS   Steve Chen
      • NFS   chetan patil
      • NFS   Steve Chen
      • NFS   Jon Povey
• MV_doubt   Swapnil Ashtekar
• Which is going to be the latest kernel version for this year   Victor Rodriguez
  • Which is going to be the latest kernel version for this year   "Singapore Citizen Mr. Teo En Ming (Zhang E
  • Which is going to be the latest kernel version for this year   Greg KH
• [PATCH v4 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
  • [PATCH v4 01/12] misc: add driver for sequencer serial port   Linus Walleij
• Resend a patch   Victor Rodriguez
• SD card   chetan patil
• Dynamically Loadable Kernel Module   Swapnil Ashtekar
• SD card.....   Swapnil Ashtekar
  • SD card.....   Nori, Sekhar
• Problem in openRTSP client on DM365 IPNC   Suresh Somasekharappa
• Need help to compile WINCE version DSPLINK for omapl138   chensu.main
• [PATCH v6 0/9] Add Omapl138-Hawkboard support   vm.rod25 at gmail.com
  • [PATCH v6 1/9] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 2/9] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 3/9] davinci: ASoC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 4/9] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 5/9] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
  • [PATCH v6 7/9] davinci: MMC/SD support for Omapl138-Hawkboar   vm.rod25 at gmail.com
  • [PATCH v6 8/9] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v6 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com

Last message date: Fri Oct 29 10:10:45 CDT 2010
Archived on: Tue Nov 2 07:58:37 CST 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...