September 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Sep 1 02:40:23 CDT 2010
Ending: Thu Sep 30 20:15:55 CDT 2010
Messages: 397

• UBI crashes / fixing NAND subpage writes   Jon Povey
  • UBI crashes / fixing NAND subpage writes   Artem Bityutskiy
  • UBI crashes / fixing NAND subpage writes   Alper YILDIRIM
    • UBI crashes / fixing NAND subpage writes   Jon Povey
      • UBI crashes / fixing NAND subpage writes   Marc-Andre Chenier
      • UBI crashes / fixing NAND subpage writes   Jon Povey
• [RFC] nand/davinci: Fix comment to match the code   Wolfram Sang
• [PATCH] hawkboard v_2   Sergei Shtylyov
  • Fwd: [PATCH] hawkboard v_2   Victor Rodriguez
    • Fwd: [PATCH] hawkboard v_2   Sergei Shtylyov
      • Fwd: [PATCH] hawkboard v_2   Victor Rodriguez
      • Fwd: [PATCH] hawkboard v_2   Victor Rodriguez
      • Fwd: [PATCH] hawkboard v_2   Kevin Hilman
• [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
  • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Ambrose, Martin
    • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Ambrose, Martin
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Ambrose, Martin
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Ambrose, Martin
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Ambrose, Martin
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Caglar Akyuz
      • [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering   Victor Rodriguez
      • Hawkboard Support in Mainline (was Re: [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering)   Caglar Akyuz
      • Hawkboard Support in Mainline (was Re: [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering)   Victor Rodriguez
      • Hawkboard Support in Mainline (was Re: [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering)   Victor Rodriguez
      • Hawkboard Support in Mainline (was Re: [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering)   Nori, Sekhar
      • Hawkboard Support in Mainline (was Re: [PATCH v3 1/1] DA8XX/OMAP-L1XX: FB: Implement double buffering)   Caglar Akyuz
• mmc over SPI on DM6467 based board. card not detected.   Martin Guy
• XML parser for DM3xx   Amir Yungman
• Status of OMAPL138 compared to Arago   Marc-André Hébert
  • Status of OMAPL138 compared to Arago   Steve Chen
  • Status of OMAPL138 compared to Arago   David Easton
• Status of OMAPL138 compared to Arago   Steve Chen
• Status of the Davinci EMAC driver   Gaer, A.
  • Status of the Davinci EMAC driver   Mike Williamson
• [RFC] nand/davinci: Fix comment to match the code   Artem Bityutskiy
  • [PATCH] nand/davinci: relax a timeout for ECC-initialization   Wolfram Sang
• [PATCH v2] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v2] davinci: Initial support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH] hawkboard v_2   Kevin Hilman
  • [PATCH] hawkboard v_2   Syed Mohammed, Khasim
  • [PATCH] hawkboard v_2   Syed Mohammed, Khasim
    • [PATCH] hawkboard v_2   Victor Rodriguez
      • [PATCH] hawkboard v_2   Kevin Hilman
      • [PATCH] hawkboard v_2   Nori, Sekhar
• [PATCH] davinci: Add machine checks to DA8XX serial console init routines   Kevin Hilman
  • [PATCH] davinci: Add machine checks to DA8XX serial console init routines   Sergei Shtylyov
    • [PATCH] davinci: Add machine checks to DA8XX serial console init routines   Kevin Hilman
      • [PATCH] davinci: Add machine checks to DA8XX serial console init routines   Nori, Sekhar
• [PATCH] davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.   Kevin Hilman
• [PATCH v2] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
    • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Michael Williamson
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Nori, Sekhar
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Christophe Aeschlimann
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Christophe Aeschlimann
    • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
    • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Caglar Akyuz
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
      • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v3] davinci: Initial support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Michael Williamson
  • [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Sergei Shtylyov
    • [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
  • [PATCH v3] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
  • [PATCH v2 01/10] net: davinci_emac: separate out davinci mdio   Cyril Chemparathy
  • [PATCH v2 02/10] davinci: add mdio platform devices   Cyril Chemparathy
  • [PATCH v2 03/10] omap: add mdio platform devices   Cyril Chemparathy
  • [PATCH v2 04/10] net: davinci_emac: switch to new mdio   Cyril Chemparathy
  • [PATCH v2 05/10] davinci: cleanup unused davinci mdio arch code   Cyril Chemparathy
    • [PATCH v2 05/10] davinci: cleanup unused davinci mdio arch code   Michael Williamson
  • [PATCH v2 06/10] omap: cleanup unused davinci mdio arch code   Cyril Chemparathy
  • [PATCH v2 07/10] net: davinci_emac: cleanup unused mdio emac code   Cyril Chemparathy
  • [PATCH v2 08/10] net: davinci_emac: separate out cpdma code   Cyril Chemparathy
  • [PATCH v2 09/10] net: davinci_emac: switch to new cpdma layer   Cyril Chemparathy
  • [PATCH v2 10/10] net: davinci_emac: cleanup unused cpdma code   Cyril Chemparathy
  • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
    • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
      • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   David Miller
      • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
  • [PATCH v2 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
• Inconsistent ATA write speeds between different boards   Joshua Hintze
• [PATCH v4] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
• Querying PSC status?   Michael Williamson
• [PATCH] nand/davinci: relax a timeout for ECC-initialization   Sudhakar Rajashekhara
  • [PATCH] nand/davinci: relax a timeout for ECC-initialization   Wolfram Sang
• [PATCH] davinci: add idcode for tnetv107x rev 1.1/1.2   Cyril Chemparathy
  • [PATCH] davinci: add idcode for tnetv107x rev 1.1/1.2   Kevin Hilman
• [PATCH 3/3] davinci: Map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE   Shilimkar, Santosh
• [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
  • [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Sergei Shtylyov
    • [PATCH] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
• [PATCH v1] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Michael Williamson
  • [PATCH v1] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Kevin Hilman
• when use linuxinput keyboard,ttyS2 console can't be used on OMAPl137_da8xx   詹成江
• DM6467 AAC audio encoding process fails with -Os compiler flag.   Krunal Patil
• [PATCH 1/2] davinci: Add generic PWM support for the PWM control   Sugumar Natarajan
  • [PATCH 1/2] davinci: Add generic PWM support for the PWM control   Kevin Hilman
    • [PATCH 1/2] davinci: Add generic PWM support for the PWM control   Sugumar Natarajan
• [PATCH 2/2] DA850/OMAPL138: eCAP driver support for PWM signal generation   Sugumar Natarajan
• [PATCH] nand/davinci: relax a timeout for ECC-initialization   Artem Bityutskiy
• If TVP5150 has industrial edition   Jammy Dane
• [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Nori, Sekhar
    • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Sergei Shtylyov
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
    • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Sergei Shtylyov
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
      • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
  • [PATCH v3 01/10] net: davinci_emac: separate out davinci mdio   Cyril Chemparathy
  • [PATCH v3 02/10] davinci: add mdio platform devices   Cyril Chemparathy
  • [PATCH v3 03/10] omap: add mdio platform devices   Cyril Chemparathy
    • [PATCH v3 03/10] omap: add mdio platform devices   Tony Lindgren
  • [PATCH v3 04/10] net: davinci_emac: switch to new mdio   Cyril Chemparathy
  • [PATCH v3 05/10] davinci: cleanup unused davinci mdio arch code   Cyril Chemparathy
  • [PATCH v3 06/10] omap: cleanup unused davinci mdio arch code   Cyril Chemparathy
    • [PATCH v3 06/10] omap: cleanup unused davinci mdio arch code   Tony Lindgren
  • [PATCH v3 07/10] net: davinci_emac: cleanup unused mdio emac code   Cyril Chemparathy
  • [PATCH v3 08/10] net: davinci_emac: separate out cpdma code   Cyril Chemparathy
  • [PATCH v3 09/10] net: davinci_emac: switch to new cpdma layer   Cyril Chemparathy
  • [PATCH v3 10/10] net: davinci_emac: cleanup unused cpdma code   Cyril Chemparathy
  • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
    • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Caglar Akyuz
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Caglar Akyuz
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Caglar Akyuz
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
      • [PATCH v3 00/10] split out emac cpdma and mdio for reuse   Michael Williamson
• Some questions about USB mass storage support   林智勇
• [PATCH v2 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v2 1/2] davinci: Add generic PWM support for PWM control   Kevin Hilman
    • [PATCH v2 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
• [PATCH v2 2/2] davinci: da850: eCAP driver for PWM signal generation   Sugumar Natarajan
• [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Sergei Shtylyov
  • [PATCH v5] davinci: Initial support for Omapl138-Hawkboard   Syed Mohammed, Khasim
• USB support   林智勇
• Adding a library (libusb) to the toolchain for cross-compilation - Working with DM6446   Arturo CV
• No subject   林智勇
• [PATCH v3 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v3 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
• [PATCH v3 2/2] davinci: da850: eCAP driver for PWM signal generation   Sugumar Natarajan
• [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Caglar Akyuz
    • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Caglar Akyuz
    • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
    • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Caglar Akyuz
      • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Kevin Hilman
      • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Caglar Akyuz
      • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Kevin Hilman
  • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v4 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
• [PATCH v4 2/2] davinci: da850: eCAP driver for PWM signal generation   Sugumar Natarajan
• [PATCH v6] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v6] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
    • [PATCH v6] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
      • [PATCH v6] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v6] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
• [PATCH] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
  • [PATCH] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
    • [PATCH] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
      • [PATCH] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
• Chroma Conversion from IPIPE_YUV420SP to IPIPE_UYVY   hitesh
• How to add a library (libusb) to the Toolchain for cross-compilation - DM6446   Arturo CV
• Penawaran mouse, mouse pad dan flash drive   locanojakarta at yahoo.com
• Driver   Raffaele Recalcati
• Davinci-linux-open-source Digest, Vol 57, Issue 43   chetan patil
• [PATCH] musb_gadget: restart request on clearing endpoint halt   Sergei Shtylyov
  • [PATCH] musb_gadget: restart request on clearing endpoint halt   Felipe Balbi
• voice codec driver   Albert Burbea
  • voice codec driver   Sergei Shtylyov
    • voice codec driver   Raffaele Recalcati
      • voice codec driver   Albert Burbea
• [PATCH 6/6] i2c: davinci: bus recovery procedure to clear the bus   Pablo Bitton
  • [PATCH 6/6] i2c: davinci: bus recovery procedure to clear the bus   Philby John
• [PATCH 0/7] add tnetv107x input drivers   Cyril Chemparathy
  • [PATCH 1/7] davinci: define tnetv107x keypad platform data   Cyril Chemparathy
    • [PATCH 1/7] davinci: define tnetv107x keypad platform data   Dmitry Torokhov
  • [PATCH 2/7] input: add driver for tnetv107x on-chip keypad controller   Cyril Chemparathy
    • [PATCH 2/7] input: add driver for tnetv107x on-chip keypad controller   Dmitry Torokhov
  • [PATCH 3/7] davinci: add tnetv107x keypad platform device   Cyril Chemparathy
  • [PATCH 4/7] davinci: add keypad config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH 5/7] input: add driver for tnetv107x touchscreen controller   Cyril Chemparathy
    • [PATCH 5/7] input: add driver for tnetv107x touchscreen controller   Dmitry Torokhov
    • [PATCH 5/7] input: add driver for tnetv107x touchscreen controller   Datta, Shubhrajyoti
  • [PATCH 6/7] davinci: add tnetv107x touchscreen platform device   Cyril Chemparathy
  • [PATCH 7/7] davinci: add touchscreen config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH 0/7] add tnetv107x input drivers   Kevin Hilman
    • [PATCH 0/7] add tnetv107x input drivers   Dmitry Torokhov
• [PATCH 0/9] post cpdma/mdio refactoring fixes   Cyril Chemparathy
  • [PATCH 2/9] davinci: specify phy_id rather than auto-detect   Cyril Chemparathy
  • [PATCH 5/9] net: davinci_mdio: separate out controller reset   Cyril Chemparathy
  • [PATCH 6/9] net: davinci_mdio: use calculated bus access times   Cyril Chemparathy
  • [PATCH 7/9] net: davinci_mdio: work around emac soft-reset during i/o   Cyril Chemparathy
  • [PATCH 8/9] net: davinci_cpdma: add register dump routines   Cyril Chemparathy
  • [PATCH 9/9] net: davinci_emac: extended register dumps on tx timeout   Cyril Chemparathy
  • [PATCH 0/9] post cpdma/mdio refactoring fixes   Kevin Hilman
• [PATCH 1/9] net: davinci_emac: allow forced 100/full via phy_id   Cyril Chemparathy
• [PATCH 3/9] net: davinci_cpdma: requeue on early end-of-queue   Cyril Chemparathy
• [PATCH 4/9] net: davinci_emac: fix rx error handling   Cyril Chemparathy
• mt9p031 driver for dm355 (for the latest arago staging 2.6.32 tree)   Yanir Lubetkin
• [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
  • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
    • [PATCH v5 1/1] davinci: spi: replace existing driver   Caglar Akyuz
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Michael Williamson
      • [PATCH v5 1/1] davinci: spi: replace existing driver   Nori, Sekhar
• [PATCH v5 1/2] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
• [PATCH v5 2/2] davinci: da850: eCAP driver for PWM signal generation   Sugumar Natarajan
• Prefered web server fo Davinci   Rondeau, Michael
  • Prefered web server fo Davinci   Jon Povey
    • Prefered web server fo Davinci   Mark Deneen
      • Prefered web server fo Davinci   Ottavio Campana
      • Prefered web server fo Davinci   Mark Deneen
      • Prefered web server fo Davinci   Nick Thompson
• [PATCH v4 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
  • [PATCH v4 01/10] net: davinci_emac: separate out davinci mdio   Cyril Chemparathy
  • [PATCH v4 03/10] omap: add mdio platform devices   Cyril Chemparathy
  • [PATCH v4 04/10] net: davinci_emac: switch to new mdio   Cyril Chemparathy
  • [PATCH v4 05/10] davinci: cleanup mdio arch code and switch to phy_id   Cyril Chemparathy
  • [PATCH v4 06/10] omap: cleanup unused davinci mdio arch code   Cyril Chemparathy
  • [PATCH v4 07/10] net: davinci_emac: cleanup unused mdio emac code   Cyril Chemparathy
  • [PATCH v4 08/10] net: davinci_emac: separate out cpdma code   Cyril Chemparathy
  • [PATCH v4 09/10] net: davinci_emac: switch to new cpdma layer   Cyril Chemparathy
  • [PATCH v4 10/10] net: davinci_emac: cleanup unused cpdma code   Cyril Chemparathy
  • [PATCH v4 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
• [PATCH v4 02/10] davinci: add mdio platform devices   Cyril Chemparathy
• Prefered web server fo Davinci   Vinod Nanjaiah
• ### DM6446 DVR   Steve Spano
  • ### DM6446 DVR   Albert Burbea
• [PATCH v4 00/10] split out emac cpdma and mdio for reuse   Cyril Chemparathy
  • [PATCH v4 02/10] davinci: add mdio platform devices   Cyril Chemparathy
  • [PATCH v4 03/10] omap: add mdio platform devices   Cyril Chemparathy
  • [PATCH v4 04/10] net: davinci_emac: switch to new mdio   Cyril Chemparathy
  • [PATCH v4 05/10] davinci: cleanup mdio arch code and switch to phy_id   Cyril Chemparathy
  • [PATCH v4 06/10] omap: cleanup unused davinci mdio arch code   Cyril Chemparathy
  • [PATCH v4 07/10] net: davinci_emac: cleanup unused mdio emac code   Cyril Chemparathy
  • [PATCH v4 08/10] net: davinci_emac: separate out cpdma code   Cyril Chemparathy
  • [PATCH v4 09/10] net: davinci_emac: switch to new cpdma layer   Cyril Chemparathy
  • [PATCH v4 10/10] net: davinci_emac: cleanup unused cpdma code   Cyril Chemparathy
  • [PATCH v4 00/10] split out emac cpdma and mdio for reuse   Kevin Hilman
• [PATCH v4 01/10] net: davinci_emac: separate out davinci mdio   Cyril Chemparathy
• [PATCH] i2c: davinci: Fix race when setting up for TX   Jon Povey
  • [PATCH] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
    • [PATCH] i2c: davinci: Fix race when setting up for TX   Troy Kisky
• Prefered web server for Davinci   Rondeau, Michael
  • Prefered web server for Davinci   Albert Burbea
• [PATCH 0/7] add tnetv107x input drivers   Kevin Hilman
• [PATCH v2 0/5] add tnetv107x input drivers   Cyril Chemparathy
  • [PATCH v2 2/5] davinci: add tnetv107x keypad platform device   Cyril Chemparathy
  • [PATCH v2 3/5] davinci: add keypad config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v2 4/5] input: add driver for tnetv107x touchscreen controller   Cyril Chemparathy
    • [PATCH v2 4/5] input: add driver for tnetv107x touchscreen controller   Dmitry Torokhov
    • [PATCH v2 4/5] input: add driver for tnetv107x touchscreen controller   Datta, Shubhrajyoti
  • [PATCH v2 5/5] davinci: add tnetv107x touchscreen platform device   Cyril Chemparathy
• [PATCH v2 1/5] input: add driver for tnetv107x on-chip keypad controller   Cyril Chemparathy
  • [PATCH v2 1/5] input: add driver for tnetv107x on-chip keypad controller   Dmitry Torokhov
• [PATCH v2] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
  • [PATCH v2] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Sergei Shtylyov
• [PATCH v2] i2c: davinci: Fix race when setting up for TX   Jon Povey
  • [PATCH v3] i2c: davinci: Fix race when setting up for TX   Jon Povey
    • [PATCH v3] i2c: davinci: Fix race when setting up for TX   Sudhakar Rajashekhara
      • [PATCH v3] i2c: davinci: Fix race when setting up for TX   Troy Kisky
      • [PATCH v3] i2c: davinci: Fix race when setting up for TX   Jon Povey
      • [PATCH v3] i2c: davinci: Fix race when setting up for TX   Troy Kisky
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Jon Povey
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Sudhakar Rajashekhara
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Troy Kisky
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Ben Dooks
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Troy Kisky
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Sudhakar Rajashekhara
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
      • [PATCH v4] i2c: davinci: Fix race when setting up for TX   Ben Dooks
• [PATCH v3] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Michael Williamson
  • [PATCH v3] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
• Alpha blending on captured video with DM365.   Krunal Patil
  • Alpha blending on captured video with DM365.   Jon Povey
• CMemK.ko driver for recent git kernels   Brett Bolen
• RAMDISK and BUSYBOX v1.7.2 Issues   Alexander Enchevich
  • RAMDISK and BUSYBOX v1.7.2 Issues   Premi, Sanjeev
• [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
  • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Kevin Hilman
    • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
      • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Kevin Hilman
      • [PATCH v5 1/4] davinci: Add generic PWM support for PWM control   Sugumar Natarajan
• [PATCH v5 2/4] davinci: da8xx: eCAP driver for PWM signal generation   Sugumar Natarajan
• [PATCH 3/4] davinci: da850/omap-l138: Add platform specific support for eCAP driver   Sugumar Natarajan
  • [PATCH 3/4] davinci: da850/omap-l138: Add platform specific support for eCAP driver   Sergei Shtylyov
• [PATCH 4/4] davinci: da850/omapl138 evm: Platform support for PWM based backlight driver   Sugumar Natarajan
• [PATCH 1/2] davinci: da8xx: eHRPWM driver for simple PWM output control   Sugumar Natarajan
• [PATCH 2/2] davinci: Add platform specific support for eHRPWM driver   Sugumar Natarajan
  • [PATCH 2/2] davinci: Add platform specific support for eHRPWM driver   Sergei Shtylyov
    • [PATCH 2/2] davinci: Add platform specific support for eHRPWM driver   Sugumar Natarajan
• [PATCH v3 0/5] add tnetv107x input drivers   Cyril Chemparathy
  • [PATCH v3 1/5] input: add driver for tnetv107x on-chip keypad controller   Cyril Chemparathy
    • [PATCH v3 1/5] input: add driver for tnetv107x on-chip keypad controller   Dmitry Torokhov
  • [PATCH v3 2/5] davinci: add tnetv107x keypad platform device   Cyril Chemparathy
  • [PATCH v3 3/5] davinci: add keypad config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v3 4/5] input: add driver for tnetv107x touchscreen controller   Cyril Chemparathy
    • [PATCH v3 4/5] input: add driver for tnetv107x touchscreen controller   Dmitry Torokhov
  • [PATCH v3 5/5] davinci: add tnetv107x touchscreen platform device   Cyril Chemparathy
• [PATCH v4 0/5] add tnetv107x input drivers   Cyril Chemparathy
  • [PATCH v4 1/5] input: add driver for tnetv107x on-chip keypad controller   Cyril Chemparathy
  • [PATCH v4 2/5] davinci: add tnetv107x keypad platform device   Cyril Chemparathy
  • [PATCH v4 3/5] davinci: add keypad config for tnetv107x evm board   Cyril Chemparathy
  • [PATCH v4 4/5] input: add driver for tnetv107x touchscreen controller   Cyril Chemparathy
  • [PATCH v4 5/5] davinci: add tnetv107x touchscreen platform device   Cyril Chemparathy
  • [PATCH v4 0/5] add tnetv107x input drivers   Kevin Hilman
• how to start dsp program from ubl?   自由人
  • how to start dsp program from ubl?   Uppal, Deepali
• [PATCH v4] i2c: davinci: Fix race when setting up for TX   Sudhakar Rajashekhara
• USB0 problem on OMAPL138   Marc-André Hébert
  • USB0 problem on OMAPL138   Marc-André Hébert
• New WARN from dm9000 since merge to 2.6.36-rc4   Jon Povey
  • New WARN from dm9000 since merge to 2.6.36-rc4   Kevin Hilman
• porting android on dm6467   siva prasad T
  • porting android on dm6467   Syed Mohammed, Khasim
• support for dm6467 framebuffer   siva prasad T
  • support for dm6467 framebuffer   Nori, Sekhar
• musb: repeatable CPPI DMA hang bug on peripheral RX 64 byte packet   Jon Povey
  • musb: repeatable CPPI DMA hang bug on peripheral RX 64 byte packet   Felipe Balbi
    • musb: repeatable CPPI DMA hang bug on peripheral RX 64 byte packet   Jon Povey
      • musb: repeatable CPPI DMA hang bug on peripheral RX 64 byte packet   Felipe Balbi
      • musb: repeatable CPPI DMA hang bug on peripheral RX 64 byte packet   Sergei Shtylyov
• re： how to start dsp program from ubl?   自由人
• [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
    • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
      • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Nori, Sekhar
      • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Caglar Akyuz
      • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Victor Rodriguez
  • [PATCH v7] davinci: Initial support for Omapl138-Hawkboard   Alper YILDIRIM
• Problem with EMAC conficuration   Victor Rodriguez
  • Problem with EMAC conficuration   Michael Williamson
  • Problem with EMAC conficuration   Cyril Chemparathy
    • Problem with EMAC conficuration   Victor Rodriguez
      • Problem with EMAC conficuration   Caglar Akyuz
      • Problem with EMAC conficuration   Victor Rodriguez
• what is the meaning of INPSRC1 and INPSRC2 in IPIPEIF module of DM365?   Han Jun-peng
• [PATCH v4] i2c: davinci: Fix race when setting up for TX   Kevin Hilman
• [PATCH v1] davinci: EMAC support for Omapl138-Hawkboard   Victor Rodriguez
• Problem with McASP configuration   Victor Rodriguez
  • Problem with McASP configuration   Caglar Akyuz
    • Problem with McASP configuration   Victor Rodriguez
• [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Linus Walleij
• [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Sergei Shtylyov
• problem with serial console   kunal singh
  • problem with serial console   Raffaele Recalcati
    • problem with serial console   kunal singh
      • problem with serial console   Pedanekar, Hemant
      • problem with serial console   Nori, Sekhar
      • problem with serial console   Raffaele Recalcati
      • problem with serial console   kunal singh
      • problem with serial console   kunal singh
      • problem with serial console   Pedanekar, Hemant
      • problem with serial console   kunal singh
      • problem with serial console   kunal singh
• help:problem of rebuild new linux kernel of dm355   梦
• MCASP Serializer[0] configuration for audio reception on DM6467   Priya Raghavendra
• Trying to move from 1.3x dsplink to 1.65 (does ips.h replace shm_ips.h)   Brian Hutchinson
• How to set UART1 using TIOCSSERIAL IOCTL on Davinci platform?   justdoit
• [PATCH v1] davinci: sound support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [[RFC]PATCH v1] davinci: VGA support for Omapl138-Hawkboard   vm.rod25 at gmail.com

Last message date: Thu Sep 30 20:15:55 CDT 2010
Archived on: Fri Oct 8 09:32:59 CDT 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...